CRAVOT CyberRack E2 Hitch 2 Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This cravot cyberrack e2 hitch 2 review focuses on a hitch-mounted e-bike carrier designed for heavy loads. It features a 200-pound total capacity and a 2-inch receiver mount. The rack includes a ramp for easier loading and fits bikes up to 50 inches in wheelbase. Its foldable aluminum and steel frame weighs 75 pounds. You get a stable platform with soft padding to protect your bike’s finish. This spec-based look helps you decide if it fits your vehicle and cargo needs.
What stands out
- 200 lb total load capacity with 100 lbs per bike limit
- Includes a ramp for easier e-bike loading
- Foldable design for compact storage when not in use
- Fits tires up to 5 inches wide
- Salt spray resistant coating for weather protection
Who it fits
Good fit for
You should consider this rack if you own two e-bikes that weigh up to 100 pounds each. The 200-pound total capacity handles heavy cargo well. The ramp makes loading bulky bikes easier than lifting them. If you have a 2-inch receiver, this hitch mount fits securely. The foldable design helps if you need to store the rack in a garage or trunk. It suits drivers who prioritize stability and ease of use over minimal weight.
Who should skip it
Skip this option if your vehicle only has a 1.25-inch receiver. This rack requires a 2-inch hitch and will not fit smaller receivers. It weighs 75 pounds, so it may be too heavy if you frequently remove it. The ramp adds bulk, making it less ideal for tight storage spaces. If you only carry one light bike, the ramp feature is unnecessary. You might prefer a lighter, simpler platform for single, lightweight bicycles.
Verdict: The CRAVOT CyberRack E2 is a sturdy, high-capacity hitch rack for two e-bikes. It offers stable transport with a convenient ramp for heavy loads.
CRAVOT CyberRack E2 Key Specs
Mount Type: hitch
This rack attaches to your vehicle’s receiver tube rather than hanging on the trunk or roof. You need a 2-inch receiver opening for installation. This setup keeps your car’s paint safe from straps and brackets. It also leaves your roof rails free for other cargo boxes. You gain a stable base that does not sway while driving.
Load Capacity: 200 lbs total, 100 lbs per bike
The rack supports two heavy electric bikes at once. Each bike must stay under 100 pounds to fit the limit. Electric bikes often weigh more than standard models, so you must check your specific bike weight. This capacity allows you to transport two e-bikes safely without overloading the hitch. It exceeds the limits of many standard carriers.
Tire Width: 5 inches
The cradles fit tires up to five inches wide. This covers most standard e-bike tires and some fat-tire models. You do not need adapters for wider tires if they stay within this limit. It ensures a snug fit that prevents wobbling during transit. Check your tire size before buying to ensure compatibility with your specific e-bike setup.
Folding: foldable
The rack arm folds up when not in use. This clears space behind your vehicle for access to the trunk or rear door. It also makes the unit more compact for storage in your garage. You can fold it down quickly when you need to load your bikes. This feature adds convenience for daily drivers who do not carry bikes every day.
Bike Capacity: 2
The carrier holds two bicycles simultaneously. It uses a ramp system to help you load heavier electric bikes. This doubles your transport efficiency compared to single-bike racks. You can carry two bikes on one hitch mount. Ensure your vehicle’s hitch rating supports the total weight of the rack and both bikes.
Design and Build Quality
According to the listing, the CRAVOT CyberRack E2 uses a mix of aluminum and steel. This combination aims to balance strength with manageable weight. The unit weighs 75 pounds. It measures 69.1 inches long, 40.3 inches wide, and 41.5 inches high. These dimensions define the space it occupies on your vehicle. The foldable design allows you to collapse the rack when not in use. This feature simplifies storage in a garage or trunk.
The finish is described as blue gray with a coating that resists 1000 hours of salt spray. This specification suggests strong anti-rust capabilities for weatherproof performance. The listing notes soft padding and rubber covers at contact points. These elements are intended to prevent scratches on your bike’s finish. The rack secures bikes at three points using a ratchet strap system. It also features a V-shaped front wheel cradle and a semi-enclosed connecting block for stability.
The ramp is a key design element for loading e-bikes. It can be installed easily and tucked away neatly. The overall structure relies on sturdy bolts and shock-absorbing threads. This layout prioritizes stability on various terrains. You should verify that your vehicle has a 2-inch receiver before purchase. The build choices focus on protecting your equipment during transport while maintaining a modern aesthetic.
Setup And Everyday Use Guide
Installing this hitch-mounted carrier requires a 2-inch receiver tube on your vehicle. The design relies on a secure bolt system to lock into place. This method avoids straps that might scratch your paint. The rack folds for storage, which simplifies garage parking. You can tuck the ramp neatly against the frame when not in use. Loading e-bikes is assisted by the included ramp feature. This is helpful given the 200-pound total capacity limit.
Each bike must weigh no more than 100 pounds. The carrier accommodates tires up to 5 inches wide. Wheelbases up to 50 inches fit within the cradle space. The updated V-shaped front wheel cradle handles various tire sizes. A semi-enclosed connecting block on the vertical rod adds stability. Shock-absorbing threads help dampen vibrations from road imperfections.
Securing your bikes involves a ratchet strap-tightening system. The rack holds each bike at three points using two secure bars. Soft padding and rubber covers protect your bike’s finish from scratches. This is crucial for expensive e-bikes with delicate components. The coating resists rust after 1000 hours of salt spray testing. This suggests it handles wet or salty road conditions well. The blue gray finish blends with most modern vehicles. You should consult the manual for specific torque requirements. The manufacturer offers spare parts and a one-year warranty. This ensures long-term support for any worn components. Daily use remains straightforward once the initial setup is complete.
Things To Check Before Buying
Before you buy, verify your vehicle’s receiver tube is exactly two inches. The CyberRack E2 does not fit smaller openings. You must also measure your e-bikes carefully. The rack handles tires up to five inches wide and wheelbases up to fifty inches. If your bike is wider, it will not secure properly. Check the total weight of your bikes. This carrier supports two hundred pounds total, or one hundred pounds per bike. Heavy e-bikes may exceed the per-bike limit. Keep the rack clean to maintain its salt-spray resistant coating. The aluminum and steel construction needs occasional wiping to prevent corrosion. This hitch option sits alongside roof boxes in our guide. Roof boxes offer weather protection for gear. This rack carries the bikes themselves. Choose this if you need to transport the actual vehicles rather than just cargo. It requires your vehicle to have the correct hitch hardware. Ensure your receiver is clean and free of rust before installation.
Check before you buy
- Confirm your vehicle has a 2-inch receiver tube.
- Measure your e-bike tire width to ensure it fits within 5 inches.
- Check wheelbase length does not exceed 50 inches.
- Weigh each bike to stay under the 100-pound per bike limit.
The product at a glance
CRAVOT CyberRack E2 Hitch 2 E-Bike Rack
Best for: Transporting two heavy electric bikes
- Bike Capacity
- 2
- Mount Type
- Hitch
- Load Capacity
- 100 lbs per bike, 200 lbs total
- Receiver Size
- 2"
- Folding
- Foldable
- Vehicle Compatibility
- Cars, trucks, SUVs, minivans, trailer
View on Amazon: CRAVOT CyberRack E2 Hitch 2 E-Bike Rack Affiliate link
The CRAVOT CyberRack E2 is a hitch-mounted bike carrier designed for electric bicycles. It supports up to 200 pounds total, with a 100-pound limit per bike. The rack accommodates tires up to 5 inches wide and wheelbases up to 50 inches. It features a foldable design and includes a ramp for easier loading. The unit weighs 75 pounds and measures 69.1 inches in length. It fits standard 2-inch vehicle receivers.
Pros
- Supports up to 200 pounds total load capacity
- Includes a ramp for easier e-bike loading
- Foldable design for compact storage
- Accommodates tires up to 5 inches wide
Cons
- Weighs 75 pounds, which is heavy for manual handling
- Limited to a 2-inch receiver size only
- Only includes a 1-year warranty
Good fit if
- You need to transport heavy electric bikes
- You have a 2-inch vehicle receiver
- You want a ramp for easier loading
Skip if
- You only have a 1.25-inch receiver
- You prefer a lightweight rack under 50 pounds
- You need to carry more than two bikes
Verdict: The CRAVOT CyberRack E2 200 lb Hitch Rack suits owners of heavy e-bikes who have a 2-inch receiver and need a ramp for loading. It is a solid choice for transporting two large bikes securely.
Specifications side by side
| Spec | CRAVOT CyberRack E2 Hitch 2 E-Bike Rack |
|---|---|
| Bike Capacity | 2 |
| Mount Type | Hitch |
| Load Capacity | 100 lbs per bike, 200 lbs total |
| Receiver Size | 2" |
| Folding | Foldable |
| Vehicle Compatibility | Cars, trucks, SUVs, minivans, trailer |
| Tire Width | 5" |
| Vehicle Type | Car, SUV, Truck |
| Use | Bike |
| Dimensions | 69.1 × 40.3 × 41.5 inches |
| Weight | 75 pounds |
| Color | Blue Gray |
| Model | CyberRack E2 |
Frequently asked questions
Does the CRAVOT CyberRack E2 fit my 2-inch receiver hitch?
Yes, this rack is designed specifically for 2-inch receiver tubes. You must verify your vehicle has this exact opening size. It will not fit smaller receivers. The hitch mount provides a stable base for heavy loads. Ensure your hitch class supports the rack's weight and the bikes you plan to carry.
How much weight can the CyberRack E2 hold?
The total load capacity is 200 pounds. This allows you to transport two heavy electric bikes securely. Always check your vehicle’s hitch rating as well. The rack itself weighs 75 pounds. Distribute the bike weight evenly across the two arms for balanced towing.
What are the dimensions of the CRAVOT CyberRack E2?
The unit measures 69.1 inches in length, 40.3 inches in width, and 41.5 inches in height. These dimensions accommodate bikes with wheelbases up to 50 inches. The width allows for tires up to 5 inches wide. Plan your parking space accordingly, as the extended length may affect rear visibility.
Is the CRAVOT CyberRack E2 suitable for electric bikes?
Yes, it is best for transporting two heavy electric bikes. The 200-pound capacity handles the extra weight of e-bikes. The ramp feature aids in loading heavier units. It fits tires up to 5 inches wide. This makes it a practical choice for owners of large, heavy e-bikes.
What color is the CRAVOT CyberRack E2?
The rack comes in a Blue Gray finish. This color choice helps it blend with most vehicle exteriors. The finish is part of the aluminum and steel construction. It offers a durable surface for daily use. The color does not affect the structural performance or capacity.
Does the CyberRack E2 fold for storage?
Yes, the design allows the rack to fold. This feature simplifies storage when the carrier is not in use. You can tuck it away to save space in your garage. The folding mechanism is part of the hitch-mounted design. It does not require removal from the vehicle for folding.