ECOTRIC 46.2 X 26.8 X Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This ecotric 46 2 x 26 8 x review covers a hitch-mounted carrier built for heavy, bulky items. It features a 500 lb load capacity and a platform measuring 46.2 by 26.8 inches. The unit is constructed from durable steel with a black powder-coated finish. It attaches to any 2-inch vehicle receiver, making it compatible with most trucks and SUVs. The design includes a folding ramp that doubles as a safety rail. You get a total ramp length of 38.7 inches when extended. This setup provides a secure platform for transporting wheelchairs, scooters, or snow blowers without requiring external trailers.
What stands out
- 500 lb weight capacity supports heavy mobility devices and equipment
- 26.8 by 46.2 inch steel platform offers ample cargo space
- 38.7-inch folding ramp extends for easy loading of wheeled items
- Locks flat in closed position to reduce wind resistance
- Compatible with all standard 2-inch hitch receivers
Who it fits
Good fit for
This carrier suits owners of large trucks or SUVs who need to transport wheelchairs, scooters, or snow blowers. The 500 lb capacity handles heavy mobility devices that exceed typical cargo limits. The folding ramp design makes loading easier for users who cannot lift heavy items onto a high bed. It is ideal for those with Class III or IV hitches. The steel construction ensures durability for frequent use. You will appreciate the secure tie-down points for stabilizing your cargo during transit.
Who should skip it
Look elsewhere if you drive a vehicle with a 1.25-inch receiver, as this unit requires a 2-inch opening. The 67.3 lb weight of the carrier itself may be challenging to lift without assistance. You should avoid this if you need a hitch tightener included, as it is not provided. Wobbling may occur without an anti-wobble plate, which you must purchase separately. It is not suitable for lightweight, small items that do not require a 500 lb rated platform.
Verdict: The ECOTRIC hitch cargo carrier is a robust, spec-driven solution for transporting heavy mobility devices and large equipment. Its 500 lb capacity and folding ramp make it a practical choice for compatible vehicles.
ECOTRIC Carrier Key Specs Explained
Weight Capacity: 500 lb
This rating indicates the maximum load the carrier can safely support. You can transport heavy mobility devices, snow blowers, or large toolboxes without exceeding structural limits. When shopping, compare this to standard 165 lb carriers. This higher limit makes it suitable for bulky items that exceed typical cargo box capacities.
Basket Dimensions: 46.2" x 26.8" x 3"
These measurements define the flat platform area available for loading. The 46.2-inch length accommodates long items like kayaks or lumber. The 3-inch side rail height helps keep smaller items from sliding off during transit. You should verify your vehicle roof or hitch width to ensure this footprint fits your setup securely.
Mount Type: Hitch-mount (2-inch receiver)
This carrier attaches directly to a 2-inch square hitch receiver on your vehicle. It is not a roof box and does not require roof rails. You must check your vehicle specifications to confirm it has a compatible hitch class III or IV receiver. This mounting style keeps your roof clear for other gear.
Material: Steel
The carrier is constructed from heavy-duty steel with a black powder-coated finish. This material provides high rigidity and durability for rough terrain or heavy loads. Steel is heavier than aluminum, so you must account for the unit's own weight when calculating total hitch load. This construction supports the 500 lb capacity rating.
Design and build quality
The ECOTRIC hitch carrier is constructed from heavy-duty steel with a black powder-coated finish. According to the listing, this coating is intended to add longevity and resist corrosion. The platform measures 46.2 inches by 26.8 inches, providing a large surface area for bulky items. The side rails stand three inches high, which helps contain smaller objects or secure straps during transit. This layout suits wheelchairs, scooters, and snow blowers that require a flat, stable base.
The unit weighs 67.3 pounds, while the folding ramp gate adds another 16 pounds. The design includes a three-inch safety rail along the edges. The ramp features internal spring-loaded pull locks and a handle for easy folding. It offers three positions: closed flat, open L-shape, and open flat. You can lock the ramp flat when not in use to save space. Tie-down straps can be secured to holes located on the sides of the ramp.
This carrier mounts to a two-inch receiver hitch, compatible with classes III or IV. The heavy-duty folding hitch enhances rigidity. Note that the listing recommends a hitch tightener to minimize wobbling, as an anti-wobble plate is not included. Mobility devices should not be occupied during loading. The rated capacities of your vehicle hitch must not be exceeded. The design prioritizes structural strength and secure transport for heavy loads.
Setup And Daily Use Guide
Installing this carrier requires a 2-inch vehicle hitch receiver. The unit is compatible with hitch classes III or IV. You slide the receiver tube into your vehicle’s hitch opening. The listing notes that a hitch tightener is recommended to minimize wobbling, although an anti-wobble plate is not included. Once secured, the carrier provides a stable platform for your cargo.
The design includes three distinct positions: closed flat, open L-shape, and open flat. To change positions, you use the built-in handle to fold or unfold the ramp. The ramp features internal spring-loaded pull locks for secure positioning. When not in use, the folding ramp locks flat against the carrier body. This saves space and reduces visual obstruction.
Daily loading involves utilizing the ramp as a slide. The total ramp length is 38.7 inches when extended. This length assists in rolling or sliding items like wheelchairs, scooters, or snow blowers onto the 46.2 by 26.8 inch platform. The side rails are 3 inches high, providing a barrier to keep items from sliding off during transport. You can secure cargo using tie-down straps attached to holes on the ramp sides.
Always ensure the rated capacities of your vehicle hitch are not exceeded. The carrier supports up to 500 lbs. Note that mobility devices should not be occupied during loading or unloading. The steel construction and powder-coated finish are intended to withstand regular outdoor use and resist corrosion.
Check Hitch Rating Before Buying
Before you finalize this purchase, verify your vehicle’s hitch class. This carrier fits 2-inch receivers, typically found on Class III or IV hitches. Ensure your vehicle’s hitch rating exceeds 500 lbs. You must also check the tongue weight limit of your hitch ball or receiver. The unit weighs 67.3 lbs, so consider your ability to lift it into position. The listing recommends a hitch tightener to reduce wobbling, as anti-wobble plates are not included. Regularly inspect the powder-coated finish for chips or rust, especially after winter use. Clean the steel surface to maintain longevity. Compare this heavy-duty option against lighter aluminum carriers if you prioritize ease of installation. This steel model suits those needing maximum load capacity for mobility devices or snow blowers. It is less ideal for daily small loads where weight matters. Always keep the ramp mechanism lubricated for smooth folding. This practical approach ensures safe transport without damaging your vehicle’s hitch system.
Check before you buy
- Confirm your hitch class is III or IV.
- Verify vehicle hitch rating exceeds 500 lbs.
- Purchase a hitch tightener to reduce wobbling.
- Ensure you can lift 67.3 lbs safely.
The product at a glance
ECOTRIC Hitch Cargo Carrier with Ramp
Best for: heavy mobility devices and snow blowers
- Mount Type
- Hitch-mount
- Weight Capacity
- 500 lbs
- Basket Dimensions
- 46.2 x 26.8 x 3 inches
- Material
- Steel
- Side Rail Height
- 3 inches
- Receiver Size
- 2-inch
View on Amazon: ECOTRIC Hitch Cargo Carrier with Ramp Affiliate link
This hitch-mounted carrier features a 46.2 x 26.8 inch steel platform with a 500 lb weight capacity. It includes a 38.7-inch folding ramp that locks flat for storage. The design suits heavy items like wheelchairs or snow blowers. It mounts to a 2-inch receiver and weighs 67.3 lbs. You get a durable, high-capacity solution for bulky gear that needs easy loading.
Pros
- 500 lb weight capacity for heavy loads
- 46.2 x 26.8 inch platform size
- Folding ramp locks flat for storage
- Compatible with all 2-inch receivers
Cons
- Anti-wobble plate is not included
- Side rails are only 3 inches high
- Requires separate hitch tightener recommendation
Good fit if
- You need to transport wheelchairs or scooters
- You have a 2-inch hitch receiver
- You require a 500 lb load capacity
Skip if
- You only have a 1.25-inch receiver
- You need a roof-mounted cargo box
- You want an included anti-wobble device
Verdict: ECOTRIC 500 lb Hitch Cargo Carrier is a heavy-duty option for users with 2-inch hitches who need to move large, wheeled items. It fits those prioritizing high weight limits over compact storage.
Specifications side by side
| Spec | ECOTRIC Hitch Cargo Carrier with Ramp |
|---|---|
| Mount Type | Hitch-mount |
| Weight Capacity | 500 lbs |
| Basket Dimensions | 46.2 x 26.8 x 3 inches |
| Material | Steel |
| Side Rail Height | 3 inches |
| Receiver Size | 2-inch |
| Load Capacity | 500 lb |
| Vehicle Type | Car, SUV, Truck, Van |
| Size | Large |
| Dimensions | 46.2 × 26.8 × 3 inches |
| Weight | 67.3 pounds |
| Color | Black |
| Model | ECOSCC |
Frequently asked questions
Does the ECOTRIC carrier fit a 1.25-inch hitch?
No. This model is designed strictly for 2-inch hitch receivers. You must verify your vehicle has a 2-inch opening before attempting installation. Using an adapter for a smaller hitch is not recommended for a unit with this 500 lb capacity, as it compromises stability and safety.
How heavy is the ECOTRIC cargo carrier itself?
The unit weighs 67.3 pounds. This is the empty weight of the steel platform. You need to account for this when calculating total tongue weight. Ensure your vehicle’s hitch receiver can support both the carrier’s weight and your intended load without exceeding limits.
Is the ECOTRIC carrier compatible with Class III hitches?
Yes. It fits 2-inch receivers found on Class III and Class IV hitches. Check your vehicle manual to confirm the hitch class. The carrier requires a standard 2-inch opening to slide the receiver tube into securely for safe transport of heavy items.
What is the maximum weight this carrier can hold?
It supports up to 500 lb. This high capacity allows you to transport heavy mobility devices or snow blowers. Always ensure your vehicle’s hitch rating also supports this weight. Do not exceed the 500 lb limit to maintain structural integrity and safe driving.
Does the ECOTRIC carrier come with a lock?
The provided specifications do not mention an included lock. You may need to purchase a separate hitch lock or cable to secure your cargo. The platform is open, so securing items with straps is essential for safety during transit.
What color is the ECOTRIC hitch carrier?
It is black. The steel platform features a black powder-coated finish. This coating is intended to resist corrosion and add longevity to the unit. The dark color helps blend with most vehicle rear bumpers and hitches.