Goplus Hitch Cargo Carrier Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This goplus hitch cargo carrier review examines a 50-inch aluminum carrier built for heavy loads. It features a 500-pound weight capacity and includes a 41.5-inch loading ramp. The unit weighs 40 pounds, making it lighter than steel alternatives. It mounts to a 2-inch receiver and measures 50 by 29.5 inches. The design prioritizes ease of loading for bulky items like scooters. You get nine-inch side rails for security and red reflectors for visibility. This setup targets users who need to transport mobility devices or large equipment without lifting them manually.
What stands out
- 500-pound load capacity on a 40-pound aluminum frame
- 41.5-inch loading ramp eliminates heavy lifting
- 50-inch by 29.5-inch basket provides ample space
- Nine-inch side rails keep cargo secure
- Compatible with Class III or IV 2-inch hitches
Who it fits
Good fit for
This carrier suits owners of SUVs, trucks, or vans with a 2-inch hitch receiver. It is ideal for transporting wheelchairs, mobility scooters, or lawnmowers. The integrated ramp makes loading these items easier than using a flat bed. You benefit from the high side rails if you carry loose gear. The aluminum construction helps if you want to reduce rear-end weight. It fits users who prioritize capacity and ease of loading over compact storage.
Who should skip it
Skip this option if your vehicle only has a 1.25-inch hitch receiver. The 50-inch length may obstruct rear visibility or lights on smaller cars. You should avoid it if you need a low-profile solution, as the ramp and rails add height. It is not suitable for aerodynamic highway travel at high speeds, as the flat design creates drag. Users seeking a compact, foldable carrier for daily commuting will find this unit too bulky and permanent.
Verdict: This carrier offers high capacity and easy loading for bulky items. It fits users with 2-inch hitches who transport mobility devices or large gear.
Key specs explained for you
Weight Capacity: 500 lb
This carrier supports up to 500 pounds of cargo. You can transport heavy items like mobility scooters, wheelchairs, or lawnmowers without worrying about structural failure. Compare this high limit to standard roof boxes, which often max out at 150 pounds. This spec makes the unit suitable for bulky, dense equipment that would exceed the limits of smaller carriers.
Material: Aluminum
The frame is constructed from aluminum, which is significantly lighter than steel. The unit weighs only 40 pounds, making it easier to handle during installation and removal. Aluminum also resists rust and corrosion better than bare metal. This material choice is practical for buyers who want durability without adding excessive weight to their vehicle's hitch.
Mount Type: Hitch Mount
This carrier attaches directly to your vehicle's rear hitch receiver rather than your roof. This design keeps your cargo low, improving your vehicle's center of gravity and fuel efficiency. It also eliminates the need to lift heavy items onto a roof rack. This mount type is ideal for SUVs, trucks, and vans equipped with a standard receiver.
Receiver Size: 2 in
The carrier fits into a standard 2-inch hitch receiver. You must verify that your vehicle has this specific receiver size before purchasing. A 2-inch receiver is common on larger trucks, SUVs, and vans. If your vehicle has a 1.25-inch receiver, this carrier will not fit. This spec ensures mechanical compatibility with your towing hardware.
Side Rail Height: 9 in
The side rails stand 9 inches high to contain your cargo. This height helps prevent smaller items from sliding off during transit. It also provides anchor points for tie-down straps. Compare this to open trays with low rails, which offer less security. The 9-inch height strikes a balance between visibility and cargo containment for most loads.
Aluminum Build and Ramp Layout
The listing describes a heavy-duty aluminum frame finished in silver. Aluminum is chosen for its strength-to-weight ratio. This carrier weighs 40 pounds. That is significantly lighter than comparable steel models. The material choice helps keep the tongue weight low for your vehicle's hitch.
The basket measures 50 inches long by 29.5 inches wide. Side rails stand 9 inches high. These rails help keep cargo from shifting or falling during transit. Four red reflectors are included to improve visibility on the road. You should attach them according to the instructions to ensure safety at night.
A 41.5-inch long loading ramp is attached to the unit. The ramp is 27.5 inches wide. This design allows you to roll heavy items like mobility scooters, wheelchairs, or lawnmowers directly into the basket. You do not need to lift these heavy objects. The carrier mounts to a standard 2-inch receiver. It is compatible with Class III or IV hitches. You only need to assemble three main parts. This simple layout makes setup quick and labor-saving for most users.
Setup and everyday use guide
Setting up this Goplus hitch cargo carrier is straightforward. You only need to assemble three main parts. The process is designed to be labor-saving. Once assembled, you insert the unit into a Class III or Class IV 2-inch hitch receiver. This mounting type fits most trucks, SUVs, vans, and cars. Ensure your vehicle has the correct receiver size before installation.
Daily use focuses on heavy loading. The 41.5-inch long ramp allows you to roll items directly onto the 50-inch by 29.5-inch aluminum basket. You do not need to lift heavy objects like mobility scooters, wheelchairs, or lawnmowers. This feature reduces physical strain during loading.
Securing your cargo is simple. The basket includes dedicated tie-down points. These allow you to strap down items firmly. The 9-inch high side rails provide an additional barrier. They help prevent cargo from shifting or falling out during transit. The silver aluminum frame resists corrosion and maintains a clean look.
Visibility is addressed with four red reflectors. These enhance safety by making the load visible from behind. The manufacturer recommends a maximum speed of 60 mph. You can adjust this limit based on your specific cargo weight. The 40-pound weight of the carrier itself is low, which helps preserve your vehicle’s handling. This setup is ideal for those needing to transport bulky, heavy equipment regularly.
Before You Buy This Carrier
You should verify your vehicle’s hitch class before purchasing. This unit requires a Class III or Class IV 2-inch receiver. Standard Class II hitches may not support the 500-pound capacity safely. You will also need to check your vehicle’s rear clearance. The 50-inch basket extends significantly backward. Ensure it does not obstruct your license plate or taillights. The listing includes four red reflectors, but local laws vary. You may need additional lighting for night driving. Upkeep is simple. Rinse the aluminum frame with water to remove road salt and grime. Dry it thoroughly to prevent oxidation. Tie-down straps are essential for securing loads. The basket has points for them, but you must provide the straps. This carrier is a niche solution. It suits those needing to transport wheeled mobility devices or small equipment. It does not replace a roof box for general cargo. Roof boxes offer better aerodynamics and weather protection. Choose this hitch carrier only if you have the hitch capacity and need ground-level loading for heavy items.
Check before you buy
- Confirm your vehicle has a Class III or IV 2-inch hitch receiver.
- Check rear bumper clearance for the 50-inch basket extension.
- Ensure your hitch can handle the 500-pound dynamic weight.
- Purchase separate tie-down straps to secure your cargo.
- Verify local lighting laws for reflectors on cargo carriers.
The product at a glance
Goplus 50x29.5 Aluminum Hitch Carrier with Ramp
Best for: moving mobility scooters and heavy gear
- Mount Type
- hitch-mount
- Weight Capacity
- 500 lb
- Basket Dimensions
- 50x29.5x? in
- Material
- aluminum
- Side Rail Height
- 9 in
- Receiver Size
- 2 in
View on Amazon: Goplus 50x29.5 Aluminum Hitch Carrier with Ramp Affiliate link
This hitch-mounted carrier features a 50-inch by 29.5-inch aluminum basket with a 500-pound weight capacity. It includes a 41.5-inch loading ramp and 9-inch side rails. The unit weighs 40 pounds and fits 2-inch receivers. It suits you if you transport mobility scooters or heavy equipment. The aluminum build keeps the carrier light while maintaining high strength for your cargo needs.
Pros
- 500 lb weight capacity
- Aluminum frame construction
- Includes 41.5" loading ramp
- 9" high side rails
Cons
- Limited to Class III or IV hitches
- No integrated locking mechanism listed
- Requires manual tie-downs for security
Good fit if
- You need to load mobility scooters
- You transport heavy lawnmowers
- You have a Class III or IV hitch
Skip if
- You have a Class II hitch receiver
- You need a locking security system
- You require a Class I hitch
Verdict: Goplus 50" Aluminum Hitch Carrier with Ramp is a heavy-duty solution for moving mobility scooters and lawnmowers. It fits users with Class III or IV hitches who need a high 500 lb capacity and a built-in ramp.
Specifications side by side
| Spec | Goplus 50x29.5 Aluminum Hitch Carrier with Ramp |
|---|---|
| Mount Type | hitch-mount |
| Weight Capacity | 500 lb |
| Basket Dimensions | 50x29.5x? in |
| Material | aluminum |
| Side Rail Height | 9 in |
| Receiver Size | 2 in |
| Load Capacity | 500 lb |
| Vehicle Type | Car, SUV, Truck, Van |
| Weight | 40 pounds |
| Color | Silver |
Frequently asked questions
What vehicle hitch class does this Goplus carrier require?
This unit requires a Class III or Class IV hitch receiver. It is designed specifically for the 2-inch opening found in these heavier-duty classes. You must verify your vehicle has one of these receivers before installation. Standard Class II hitches are not rated for the 500-pound capacity and may fail under load.
Can I use this carrier on a standard car?
You can use it on cars, SUVs, trucks, and vans, provided they have the correct hitch. The listing specifies compatibility with these vehicle types. However, you must ensure the vehicle has a Class III or IV hitch. Most standard sedans only have Class I or II hitches, which are unsuitable for this heavy-duty carrier.
How much does the empty carrier weigh?
The empty carrier weighs 40 pounds. This weight is attributed to its aluminum construction. Aluminum provides strength while keeping the overall mass low. This lighter weight helps reduce the tongue weight on your vehicle compared to heavier steel alternatives, though you still need a robust hitch to support the total load.
Is the ramp included with the carrier?
Yes, the unit includes a built-in loading ramp. The ramp measures 41.5 inches in length. This feature is essential for rolling heavy items like mobility scooters or lawnmowers into the basket. The ramp is integrated into the design, allowing for easier loading without needing separate equipment.
What is the maximum weight this hitch carrier can hold?
The maximum load capacity is 500 pounds. This high limit allows you to transport heavy gear, such as power equipment or mobility aids. You must never exceed this weight limit. Ensure your vehicle’s hitch rating also supports this load to maintain safety and structural integrity during transport.
Does this carrier fit a 1.25-inch hitch receiver?
No, this carrier does not fit a 1.25-inch receiver. It is designed exclusively for 2-inch hitch receivers. You must check your vehicle’s hitch size before purchasing. Using an adapter is not recommended for a 500-pound capacity carrier due to safety risks and potential structural failure under heavy loads.