OUTPRIZE Trailer Hitch Cargo Rack Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This outprize trailer hitch cargo rack review focuses on a steel carrier built for heavy loads. The basket measures 60 inches long by 24 inches wide, with 14-inch high side rails. It fits standard 2-inch hitch receivers on Class III or IV systems. The unit weighs 74 pounds and supports up to 500 pounds of cargo. Powder-coated steel helps resist rust, though indoor storage is recommended. You get a folding design for compact storage when not in use. This spec-based look helps you decide if the dimensions and capacity match your vehicle and gear needs.
What stands out
- 500 lb distributed weight capacity for heavy equipment
- 60 x 24 x 14 in basket dimensions for ample space
- Folding high side rails for secure transport and compact storage
- Includes hitch tightener to reduce wobbling and rattling
Who it fits
Good fit for
This carrier suits owners of SUVs, trucks, and vans with 2-inch hitch receivers who need to move large or heavy items. The 500 lb capacity handles bulky gear, tools, or multiple suitcases. The 14-inch side rails keep smaller items from sliding out during transit. You will appreciate the folding feature if you store the rack in a garage or tight space when it is not in use. It is a practical choice for utility-focused drivers who prioritize load capacity and secure transport over aerodynamic efficiency.
Who should skip it
You should look at another option if your vehicle only has a 1.25-inch hitch receiver, as this carrier requires a 2-inch mount. Avoid this model if you need a lightweight solution, since the steel construction weighs 74 pounds. The flat, open design with side rails may not suit loose items like gravel or sand, which could spill over the 14-inch edges. Additionally, if you require a carrier with a built-in locking mechanism for security, this unit relies on the hitch pin and does not include a lock in its standard specifications.
Verdict: The OUTPRIZE carrier offers high capacity and durable steel construction for heavy-duty hauling. It is a solid choice for users with 2-inch hitches who need to transport large loads securely.
Key specs explained
Basket Dimensions: 60 x 24 x 14 in
This listing provides a flat storage area of 60 inches by 24 inches. The 14-inch side rails help keep items from sliding off during transit. You get roughly 10 square feet of usable space. This size suits bulky gear like luggage or camping equipment. Compare this footprint with smaller carriers if you need to fit wider items or multiple bags without stacking them vertically.
Weight Capacity: 500 lb
The manufacturer states this rack supports up to 500 pounds. This high limit allows you to transport heavy tools, construction materials, or large storage bins. Standard roof boxes often hold less. You must ensure your vehicle’s hitch receiver and tow rating can handle this load. Always distribute weight evenly to maintain vehicle stability while driving.
Material: Steel
The carrier is built from heavy-duty steel. This material offers strong structural integrity for heavy loads. The listing notes a powder coating for rust protection. Steel is generally heavier than aluminum carriers. You should store this unit indoors when not in use to preserve the finish. Check joints for wear over time to ensure long-term durability.
Mount Type: 2-inch receiver
This hitch mount fits into standard 2-inch receiver tubes. It is designed for Class III or Class IV hitch systems. Most trucks and larger SUVs use this size. Verify your vehicle’s hitch size before purchasing. Smaller cars often use 1.25-inch receivers, which will not accept this carrier. Ensure the hitch pin and tightener are secure to prevent wobbling.
Design and build details
According to the listing, this carrier is built from heavy-duty steel. The frame weighs 74 pounds, which helps stabilize the unit on the road but adds significant mass to your vehicle. The steel construction supports a distributed weight capacity of 500 pounds. This high limit allows you to transport heavy equipment, gear, or large cargo loads without worrying about structural failure. The powder coating provides reliable protection against rust and corrosion, though the manufacturer recommends storing the unit indoors and applying Truck Bedliner Paint to rust-prone joints for maximum durability.
The basket layout measures 60 inches long by 24 inches wide. The 14-inch high side rails feature a rotational structure design. These rails keep luggage secure during travel but can be folded away for easier storage when the carrier is not in use. This folding mechanism adds practicality for owners with limited garage space. The unit fits into any 2-inch Class III or IV hitch receivers. A hitch tightener is included to minimize wobbling and rattling during transit. Three red reflectors are mounted to the basket to enhance visibility during nighttime drives or in severe weather conditions. The finish is black, which helps the carrier blend with most vehicle hitches.
Setup and everyday use guide
Installation begins by sliding the hitch mount into your vehicle’s 2-inch receiver. The listing notes compatibility with Class III or IV hitch receivers. You will need to secure the unit using the included hardware. A hitch tightener is provided to minimize wobbling and rattling during transit. This component is essential for keeping the carrier stable on the road. The assembly process is described as straightforward, allowing you to get the unit ready for use quickly. Once installed, the carrier adds approximately 10 square feet of storage space to your vehicle. The 60-inch length and 24-inch width provide a large, flat surface for your gear. The 14-inch high side rails help keep luggage and equipment secure. These rails feature a rotational structure design, allowing them to fold away when the carrier is not in use. This folding mechanism simplifies storage in your garage or shed. For daily driving, the carrier supports a distributed weight capacity of 500 pounds. You must ensure your load does not exceed this limit. Three red reflectors are attached to the basket to enhance visibility during nighttime or poor weather conditions. The steel construction is coated with powder to resist rust and corrosion. However, the listing recommends storing the unit indoors when possible. Applying Truck Bedliner Paint to rust-prone joints can further protect the steel. This step helps maintain the carrier’s integrity over time. The unit weighs 74 pounds, so you will need adequate strength to lift and position it on your hitch. Regular checks of the tightener and hardware are advised to ensure safe transport of your cargo.
Before You Buy This Rack
Before adding this OUTPRIZE carrier to your vehicle, verify your hitch receiver is a standard 2-inch Class III or IV type. The unit weighs 74 pounds, so ensure your vehicle’s hitch rating supports this static load plus the 500-pound cargo capacity. You should also check your vehicle’s width. At 24 inches wide, it may reduce lane clearance slightly on narrow roads. Since the steel construction is powder-coated but not fully rustproof, plan to store it indoors when not in use. Consider applying Truck Bedliner Paint to joints for extra protection. This rack offers high capacity for gear, unlike smaller carriers. It suits those needing flat, open storage rather than enclosed boxes. Check local laws regarding reflector placement. Ensure your taillights remain visible. This option fits well if you prioritize heavy-duty utility over streamlined aerodynamics. It is a practical choice for trucks and SUVs that need maximum load space without the complexity of a roof box.
Check before you buy
- Confirm your hitch receiver is a 2-inch Class III or IV type.
- Verify your vehicle can support the 74-pound empty weight plus cargo.
- Check local laws for reflector visibility and rear license plate access.
- Ensure your taillights remain fully visible with the carrier installed.
- Plan for indoor storage to protect the steel from rust.
The product at a glance
OUTPRIZE 60 x 24 x 14 in Hitch Cargo Carrier
Best for: Heavy loads in 2-inch receivers
- Mount Type
- Hitch-mount (2-inch receiver)
- Weight Capacity
- 500 lb
- Basket Dimensions
- 60 x 24 x 14 in
- Material
- Steel
- Side Rail Height
- 14 in
- Receiver Size
- 2 in
View on Amazon: OUTPRIZE 60 x 24 x 14 in Hitch Cargo Carrier Affiliate link
This OUTPRIZE hitch cargo rack measures 60 by 24 by 14 inches and weighs 74 pounds. It fits 2-inch Class III or IV receivers. The steel basket holds up to 500 pounds. High side rails keep items secure. The design folds flat for storage. It includes a hitch tightener and reflectors for safety. You get a one-year warranty on quality issues.
Pros
- 500 lb weight capacity
- Folds flat for storage
- Includes hitch tightener
- Three red reflectors
Cons
- 74 lb weight
- Requires rust protection
- No anti-theft lock
Good fit if
- You need 500 lb capacity
- You have a 2-inch receiver
- You want folding storage
Skip if
- You need 1.25-inch fit
- You want a lock included
- You prefer aluminum build
Verdict: OUTPRIZE 60-Inch Steel Hitch Cargo Carrier offers high capacity for heavy loads. It suits users who prioritize weight limits over lightweight materials.
Specifications side by side
| Spec | OUTPRIZE 60 x 24 x 14 in Hitch Cargo Carrier |
|---|---|
| Mount Type | Hitch-mount (2-inch receiver) |
| Weight Capacity | 500 lb |
| Basket Dimensions | 60 x 24 x 14 in |
| Material | Steel |
| Side Rail Height | 14 in |
| Receiver Size | 2 in |
| Load Capacity | 500 lb |
| Vehicle Type | SUV, Truck, Van |
| Dimensions | 60 × 24 × 14 inches |
| Weight | 74 pounds |
| Size | 60in |
| Color | Black |
| Model | CC-Carrier-G60-E |
Frequently asked questions
Is the 500 lb capacity distributed or peak?
The 500 lb rating is a distributed weight capacity. This means the total weight of all cargo combined must not exceed this limit. It is not a peak load for a single item. You must ensure the sum of your items stays within this 500 lb boundary for safe transport.
What receiver size does this carrier require?
This carrier requires a 2-inch hitch receiver. It is designed to fit standard 2-inch openings found on Class III or IV vehicles. It will not fit into a 1.25-inch receiver. You must verify your vehicle has a 2-inch receiver before purchasing or installing this unit.
How much does the carrier itself weigh?
The carrier weighs 74 pounds. This steel construction adds significant mass to your vehicle. You must account for this weight when calculating your total load. The static hitch rating of your vehicle must support both the 74 lb carrier and the cargo weight.
Can this rack fit on a Class II hitch?
No, this rack is not suitable for a Class II hitch. It is designed for Class III or IV receivers. These classes typically support higher weight capacities. Using it on a Class II hitch may exceed the receiver's limits and cause damage or safety issues.
What are the exact basket dimensions?
The basket measures 60 inches long by 24 inches wide. The side rails are 14 inches high. This provides a flat storage area of roughly 10 square feet. The 14-inch rails help prevent items from sliding off during transit.
Does this carrier come with a locking mechanism?
The listing does not mention a built-in locking mechanism. It includes hardware for installation and a hitch tightener. You may need to purchase a separate hitch lock to secure the carrier to your vehicle. This prevents theft of the unit itself.