Trimax Easy Rider 3-Bike Trunk Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This trimax easy rider 3 bike trunk review covers the Trimax Easy Rider 3-Bike Trunk Mount Rack. It is a trunk-mounted carrier designed for transporting bicycles. The unit holds up to three bikes, with a load capacity of 33 pounds per bike. This results in a total weight limit of 99 pounds. The rack measures 29 inches in length and 21.5 inches in width. It stands 4 inches high in its folded state. These dimensions and weight limits define its practical use for families needing to move multiple bicycles without roof racks.
What stands out
- Pre-assembled construction allows for immediate mounting without setup time
- Carries three bikes with a 33-pound limit per bike
- Folds completely flat to 4 inches high for compact storage
- Includes padded cradles and rubber straps for frame protection
Who it fits
Good fit for
This rack suits buyers who need to transport three bicycles but lack roof rails or a hitch. The 99-pound total capacity handles standard adult bikes well. You will appreciate the pre-assembled design if you want to avoid complicated installation steps. The padded contact points protect your vehicle’s paint. It is ideal for occasional trips where you need to carry multiple bikes but prefer a low-profile solution that stores easily in your trunk when not in use.
Who should skip it
You should look elsewhere if you frequently transport heavy electric bikes. The 33-pound limit per bike may be exceeded by many e-bikes. If you drive a vehicle with a sloped rear window, the trunk mount may not fit securely. This type of carrier relies on straps and hooks. It is not suitable for high-speed highway travel if you require absolute rigidity. Those needing to carry more than three bikes should consider a hitch-mounted option with higher capacity.
Verdict: The Trimax Easy Rider 3-Bike Trunk Mount Rack offers a practical, high-capacity solution for carrying three standard bikes. Its pre-assembled design and compact folding make it a convenient choice for occasional transport needs.
Trimax Easy Rider Key Specs
Mount Type: trunk
This rack attaches to the rear trunk or hatch of your vehicle. You do not need roof rails or a hitch receiver. This makes it suitable for sedans, coupes, and small SUVs that lack external mounting points. You must ensure your vehicle has a flat surface and secure anchor points for the straps. It is a versatile option for cars where roof boxes cannot fit.
Bike Capacity: 3
The carrier holds three bicycles simultaneously. This is ideal for families or groups of friends traveling together. You can transport multiple bikes without needing a larger hitch rack. Ensure you have enough trunk space to open the hatch fully when the rack is installed. This capacity allows you to move more gear than a single-bike carrier, maximizing your transport efficiency.
Load Capacity: 33 lbs per bike, 99 lbs total
Each bike can weigh up to thirty-three pounds, with a total limit of ninety-nine pounds. Heavy e-bikes may exceed this limit. You must check your bike weights before loading. Exceeding the load capacity can damage the rack or your vehicle. This limit is lower than many hitch-mounted carriers, so it is best for standard mountain or road bikes rather than heavy cargo bikes.
Width: 21.5 inches
The rack spans twenty-one and a half inches across. This width accommodates most standard bicycle handlebars and frames. It is narrow enough to fit on smaller trunks but wide enough to keep bikes stable. When comparing with other roof boxes or carriers, this width ensures your bikes do not touch each other or the vehicle sides during transit.
Length: 29 inches
The arm extends twenty-nine inches from the mounting point. This length positions the bikes away from your vehicle’s rear window and license plate. It helps prevent scratches and ensures visibility is not blocked. This dimension is crucial for larger bicycles. It also affects how much trunk space is consumed when the rack is folded flat for storage.
Design And Build Quality
The Trimax Easy Rider uses a black finish on its frame. According to the listing, the unit measures twenty-nine inches in length, twenty-one and a half inches in width, and four inches in height. These dimensions define the footprint on your trunk lid. The low height helps keep the center of gravity lower than some taller trunk racks. The color matches the structural components, which appear to be metal and plastic. The listing notes soft, padded cradles and durable rubber straps. These materials contact your bike frames directly. They isolate the metal from the rack to prevent scratches. The mounting hooks also have a special coating. This coating protects your vehicle’s paint at all contact points. You get six high-tensile safety straps for stability. They keep the rack from shifting on the highway.
The rack folds completely flat for storage. This collapsible design allows you to store it in your trunk, backseat, or garage. The listing states it is one hundred percent pre-assembled. You can attach it to your vehicle immediately after removing it from the box. A quick-adjust cam lever system helps you achieve a precise fit for your specific trunk or hatch shape. This lever allows you to tighten the mounting hooks without complex tools. The layout places the bike arms in a standard configuration for three bicycles. Each arm holds one bike up to thirty-three pounds. The total capacity is ninety-nine pounds. This load limit applies per bike, not just in total. The design prioritizes quick setup and compact storage over permanent mounting options.
Setup and everyday use
The Trimax Easy Rider arrives one hundred percent pre-assembled. You skip the assembly phase entirely. This allows for quick attachment to your vehicle trunk or hatch. The mounting system relies on coated hooks and soft padding at all contact points. This design protects your vehicle paint from scratches and scuffs during installation. You place the unit on your rear surface and secure it using six high-tensile safety straps. The cam lever adjustment system lets you tighten these straps for a precise fit. This ensures the rack stays stable on the highway without shifting. The frame includes soft, padded cradles and durable rubber straps. These components isolate and secure each bicycle frame during transport. The rack holds up to three bikes, with a limit of thirty-three pounds per bike. This totals ninety-nine pounds of load capacity. When your trip ends, the entire frame folds completely flat in seconds. This collapsible design offers compact storage. You can easily stow the rack inside your trunk, backseat, or garage. The low height of four inches keeps the profile minimal on your vehicle. The black finish blends with most car exteriors. This setup process is straightforward and requires no tools. Daily use involves loading your bicycles into the padded cradles and tightening the straps. The cam lever makes adjustments simple and fast. You can remove the rack quickly for storage when not in use.
Things to Check Before Buying
You should verify that your vehicle’s trunk lid can support the rack’s weight and the bikes. The listed dimensions are twenty-nine inches long and twenty-one and a half inches wide. Ensure these fit within your trunk’s available surface area without obstructing the rear window or license plate. The rack holds three bikes, each up to thirty-three pounds. Check that your bicycle frames fit securely into the padded cradles. Thin or irregular tube shapes may not align well with the standard cradle design. You must also confirm that the six safety straps can reach your vehicle’s anchor points comfortably. After each trip, wipe down the rubber straps and hooks to remove dirt and road grime. This simple upkeep prevents premature wear on the materials. While this trunk mount is a practical choice for sedans, it sits alongside roof boxes and cargo carriers in our guide. Those alternatives offer different storage profiles and vehicle compatibility. Consider whether you need to keep your trunk fully accessible for other gear. If you frequently carry large items, a roof box might serve your needs better than a bike rack that blocks rear access.
Check before you buy
- Verify trunk lid dimensions accommodate the twenty-nine by twenty-one and a half inch footprint.
- Confirm bicycle frame shapes fit securely into the standard padded cradles.
- Ensure safety straps reach your vehicle’s anchor points without excessive tension.
- Check that the rack does not obscure your rear license plate or taillights.
The product at a glance
Trimax Easy Rider 3-Bike Trunk Mount Rack
Best for: carrying three bikes with quick setup
- Bike Capacity
- 3
- Mount Type
- trunk
- Load Capacity
- 33 lbs per bike, 99 lbs total
- Dimensions
- 29 × 21.5 × 4 inches
View on Amazon: Trimax Easy Rider 3-Bike Trunk Mount Rack Affiliate link
The Trimax Easy Rider is a trunk-mount bike carrier for three bicycles. It supports 33 lbs per bike, with a 99 lbs total load capacity. The unit measures 29 by 21.5 by 4 inches. It arrives fully assembled and folds flat for storage. You get padded cradles and six safety straps for secure transport. This model suits drivers who need a quick, hassle-free mounting solution without complex assembly.
Pros
- Fully pre-assembled for immediate use
- Carries three bikes at 33 lbs each
- Folds flat for compact storage
- Includes six high-tensile safety straps
Cons
- Limited to trunk or hatch mounting
- No integrated lock mechanism for bike security
- Maximum load is 99 lbs total
Good fit if
- You need to transport three bikes
- You want a rack that requires no assembly
- You need a carrier that folds flat for storage
Skip if
- You only have one or two bikes
- You prefer a hitch-mounted carrier
- You need to carry more than 99 lbs of bike weight
Verdict: Trimax Easy Rider 3-Bike Trunk Carrier is a practical option for carrying three bikes. It fits drivers who prioritize quick setup and flat storage over hitch-mounted stability.
Specifications side by side
| Spec | Trimax Easy Rider 3-Bike Trunk Mount Rack |
|---|---|
| Bike Capacity | 3 |
| Mount Type | trunk |
| Load Capacity | 33 lbs per bike, 99 lbs total |
| Use | Bike |
| Dimensions | 29 × 21.5 × 4 inches |
| Color | Black |
| Model | RMER3 |
Frequently asked questions
Does the Trimax Easy Rider fit most cars?
Yes, it is designed for sedans, coupes, and small SUVs. It attaches to the rear trunk or hatch without needing roof rails or a hitch receiver. You should verify that the twenty-nine inch length and twenty-one and a half inch width fit your trunk lid without obstructing the rear window or license plate.
How many bikes can this rack hold?
The Trimax Easy Rider holds up to three bicycles. It distributes weight with a capacity of thirty-three pounds per bike. This allows you to transport a family or group of friends efficiently. Ensure your total load does not exceed the vehicle's rear hatch weight limits.
Is the Trimax Easy Rider pre-assembled?
Yes, the unit arrives one hundred percent pre-assembled. You skip the assembly phase entirely, which allows for quick attachment to your vehicle. This design choice saves time before you head out for your ride, letting you focus on securing the rack and loading your bikes.
What is the weight limit per bike?
The listed load capacity is thirty-three pounds per bike. This limit ensures the rack remains stable and safe during transport. You must not exceed this weight for any single bicycle to maintain proper balance and prevent damage to your vehicle's trunk or the rack itself.
Does it come in other colors?
The published specifications list the color as Black. The frame features a black finish that blends with most vehicle trunks. No other color options are mentioned in the available data, so you should expect a uniform black appearance when installed on your car.
How does it attach to the car?
The mounting system relies on coated hooks and soft padding at all contact points. These hooks secure the rack to the edge of your trunk lid. The padding protects your vehicle's paint from scratches while providing a firm grip to keep the carrier steady during travel.